
Add to Cart
Agriculture Waste Bio Organic Fertilizer Wet Compost Crushing Machine
Introduction of Agriculture Waste Bio Organic Fertilizer Wet Compost Crushing Machine
A half-wet material crusher is an advanced smashing technology at home and abroad, which has been researched, improved and manufactured by many years of production experience, It combined with many years of machines production experience of our factory. This machine completely solves the crushing problem of organic matter with high water content, which is a national initiative and has declared the national patent. The successful development of the half-wet material crusher has played an important role in shortening the production process of bio-organic fertilizer and compost, it also can reduce the investment of equipment and save the operation cost.
Features of Agriculture Waste Bio Organic Fertilizer Wet Compost Crushing Machine
1. Half-wet material crusher has a wide range of applications, high reliability. over a hundred kinds of materials can be crushed and will not be blocked.
2. High efficiency. The half-wet material crusher uses two-stage crushing rotor upper and lower levels, the material is first fine particles and then into a fine powder, and finally, the discharge port directly discharged.
3. Easy operating. The half-wet material crusher uses high technology, only one person can easily operate, not only safe, reliable but also easy maintenance.
Parameter of Agriculture Waste Bio Organic Fertilizer Wet Compost Crushing Machine
Model | BSFS-40 | BSFS-60 | BSFS-80 | BSFS-90 |
Prod capacity(t/h)
| 1~2 | 2~4 | 3~6 | 4~8 |
Particle size | 0.5~5 | 0.5~5 | 0.5~5 | 0.5~5 |
Power | 22 | 30 | 37 | 45 |
Overall Dimensions L×W×H | 960×560×850 | 1632×1560×1180 | 2100×2060×1800 | 2500×2040×1800 |
Advantages of Agriculture Waste Bio Organic Fertilizer Wet Compost Crushing Machine
1. The semi-wet material crusher has a flexible combination and strong applicability.
2. The semi-wet material crusher does not have any requirement for the moisture content of the material. Without the sieve bottom and the screen mesh, the material with high moisture content can be pulverized, and the viscous material with relatively high viscosity will not be clogged.
3. The semi-wet material crusher uses a high-alloy wear-resistant hammerhead. The hammer piece is made of forged, which is particularly strong and wear-resistant. It is stronger than the ordinary hammer and increases the service life of the hammer piece.
4. The semi-wet material crusher adopts gap-fixing technology. When the hammerhead is worn, the position of the hammerhead is adjusted to reduce the gap between the hammer and the lining. This will give you a satisfactory graininess